Monthly Archives: May 2023

Achieving responsibility goals requires concrete actions and now we are one step closer to our goals. Our products travel with Kaukokiito BIO, which reduces the carbon footprint by up to 90%.

As part of our sustainable development strategy, we want to reduce our waste as much as possible and we see it as a resource. That's why we chose Kaukokiito BIO to transport our products. Kaukokiito BIO delivers the products climate-friendly with renewable diesel. It is made from 100% reusable raw materials, such as waste. With Kaukokiito BIO, the carbon footprint of transportation is reduced by up to 90%, which reduces the product's climate impact.

Outrigger pads prevent machines such as vehicle cranes, personal cranes and concrete trucks from sinking into the ground. They are strong but light. Outrigger pads are made of high-quality plastic that does not absorb moisture and does not break or crack. Products in stock:

581104 Outrigger pad 400x400x40

581105 Outrigger pad 500x500x60

581106 Outrigger pad 600x600x60

For more information about other sizes and outrigger pad stowage boxes, contact:

Sales director Kaj Tammela +358 44 7420 502 | kaj.tammela@tmt.fi

Voimasampo backup power supply is a battery pack with a charger for parking lights for short parkings. The batteries are automatically charged while driving via the lighting circuit.

The system works with 8Ah batteries and 3A charging current. With a power of 48W, the operating time is about 4 hours (24W ≈ 8 h) (applies to fully charged batteries in good condition at a temperature of +20 °C).  At temperatures below zero (0–20 °C), the operating time is approximately 30–50% shorter.

Installed in a suitable place on the frame or on the inside of the structure with the two supplied housing brackets. If the battery pack is installed inside the structure, an external button can be installed for easy access.

Technical infromation:

Voltage: 24V

Battery: 8Ah

Charge: 3A

Length: 380

The new compact aluminum flatbed is designed for light goods transport vehicles, such as pick-up trucks. The Armaton MP system is modular and assembly of the flatbed does not require special tools.

The Armaton MP pick-up flatbed is a solution for small and medium-sized vehicle body builders and is based on the same type of platform concept that has long been used in the vehicle industry. 

The system is built from ready-to-use aluminum profiles. The profiles are slid into the frame profile, depending on what is being built. The result is a very light and stable flatbed without welding or special joints. The small and compact size of this platform makes it even easier to install.

Armaton pick-up flatbed is characterized by a streamlined and clean design. This maximizes the load area and facilitates the construction of purpose-built work vehicles. The

New TMT innovation Aero Side Protector with TMT Toolbox assembly is a combination of a toolbox and a side protector. Used to fade the toolbox and achieve uniform side protection appearance still maintaining the functionality of a traditional toolbox.

The toolbox frame is available in following sizes:

Height according to Aero Side Protector height: 500 | 550 mm

Width: 600 | 800 | 1000 mm

Depth: 500 mm

Currently available as a downward opening model.

Side protector is available as six meter profiles or as installation-ready elements.

For more information, contact:
Sales director Kaj Tammela +358 44 7420 502 | kaj.tammela@tmt.fi