Gas springs
MOUNTING CONDITIONS
- The gas spring should not be subjected to transverse load.
- If possible, the maximum load capacity of the gas spring should not be fully utilized.
- If desired to re-paint the gas spring, the piston rod should be covered properly.
- Do not use solvents upon purification.
- Accessories for the Gas spring installation are found on page Gas spring accessories.
INSTALLATION
- Gas springs should be installed the piston rod facing downward.
- The piston rod must be protected against voltage fluctuations, welding and grinding sparks, oxidizing chemicals and paints.
- Never grap the rod with pliers or in a vice without using protective lead, aluminium or copper jaws.
OPERATING CONDITIONS
- Operating temperature: -30ºC - +80ºC
- Maximum number of cycles (full reciprocating motion) / min : 5 pcs
STORAGE BEFORE USE
- Gas springs can be stored horizontally at ambient temperature for up to three months.
- For long-term storage gas springs must be stored vertically with the rod pointing down.
-
Gas Spring 503/303 mm, 350 N/200 mmP/N 74821€19.30 VAT 0 %
-
Gas Spring 503/303 mm, 500 N/200 mmP/N 74822€19.30 VAT 0 %
-
Gas Spring 503/303 mm, 650 N/200 mmP/N 74824€19.30 VAT 0 %
-
Gas Spring 503/303 mm, 750 N/200 mmP/N 74826€19.30 VAT 0 %
-
Gas Spring 503/303mm, 1000 N/200 mmP/N 74828€19.30 VAT 0 %
-
Gas Spring 503/303mm, 1230 N/200 mmP/N 74829€19.30 VAT 0 %
-
Gas Spring 650/400 mm, 350 N/250 mmP/N 74830€21.40 VAT 0 %
-
Gas Spring 650/400 mm, 250 N/250 mmP/N 74831€21.40 VAT 0 %
-
Gas Spring 650/400 mm, 500 N/250 mmP/N 74832€21.40 VAT 0 %
-
Gas Spring 650/400 mm, 750 N/250 mmP/N 74834€21.40 VAT 0 %
-
Gas Spring 650/400 mm, 350 N/250 mmP/N 74835€21.40 VAT 0 %
-
Gas Spring 650/400mm, 1000 N/250 mmP/N 74836€21.40 VAT 0 %